CalendarCalendar   Photos  * FAQ
It is currently Wed Oct 01, 2014 3:10 am

All times are UTC - 6 hours [ DST ]




Post new topic Reply to topic  [ 16 posts ] 
Author Message
 Post subject: Springfield Arms .410
PostPosted: Wed Jan 18, 2012 10:48 pm 
Utility Grade

Joined: Wed Jan 18, 2012 10:28 pm
Posts: 11
I have a Springfield Arms .410 single shot.

I believe the model number is 1929.

I cannot find a schematic or manual anywhere.

I would like a manual on dis-assembly and assembly.

I am new to this forum and would appreciate any help.

Dave


Top
 Profile  
 
 Post subject: Re: Springfield Arms .410
PostPosted: Wed Jan 18, 2012 11:01 pm 
Field Grade
User avatar

Joined: Sun Oct 23, 2011 12:29 am
Posts: 48
Any other markings or anything on the barrel or receiver?

_________________
Shotguns I Own:

H&R Pardner Pump 20 Gauge Synthetic Stock
Soon to own H&R Topper Trap 12 Gauge
Want to own Benelli Vinci 12 Gauge


Top
 Profile  
 
 Post subject: Re: Springfield Arms .410
PostPosted: Wed Jan 18, 2012 11:15 pm 
Utility Grade

Joined: Wed Jan 18, 2012 10:28 pm
Posts: 11
Springfield Arms Company
Chicopee Falls, Mass USA on receiver

Barrel and Lug Forged in one Piece on barrel


Top
 Profile  
 
 Post subject: Re: Springfield Arms .410
PostPosted: Wed Jan 18, 2012 11:19 pm 
Limited Edition
User avatar

Joined: Tue Mar 22, 2011 3:37 pm
Posts: 327
Location: Fergus
There is no manual for disassembly- what are you looking for? takedown or full disasebly if there is no problem I would leave it alone.
Ps I got one in 12.

_________________
I Void Waranties. 24/25


Top
 Profile  
 
 Post subject: Re: Springfield Arms .410
PostPosted: Wed Jan 18, 2012 11:22 pm 
Utility Grade

Joined: Wed Jan 18, 2012 10:28 pm
Posts: 11
Thought about tearing it down and re-bluing it.

Have only got the forearm off currently.

Do you know if this is a 3 inch or not?

What year made?


Top
 Profile  
 
 Post subject: Re: Springfield Arms .410
PostPosted: Thu Jan 19, 2012 12:13 pm 
Limited Edition
User avatar

Joined: Tue Mar 22, 2011 3:37 pm
Posts: 327
Location: Fergus
If it helps mine was made in the Year of the Lord 1935.
the bad thing about these guns is that unless you positiveloy want to ruin the gun you cannot remove the hammer. to remove the barrel pull of the foreend- if the screw is removed put it back in!
then press the lever- open the action and pull the barrel towards you the only part thatn should require mussel is removing the forend.

_________________
I Void Waranties. 24/25


Top
 Profile  
 
 Post subject: Re: Springfield Arms .410
PostPosted: Thu Jan 19, 2012 12:26 pm 
Utility Grade

Joined: Wed Jan 18, 2012 10:28 pm
Posts: 11
Guess I am confused.

Leave the gun intact?

Open the action and pull barrel forward?

Does the spring steel under the fore-end release from the lug and the barrel slide out of the receiver?


Top
 Profile  
 
 Post subject: Re: Springfield Arms .410
PostPosted: Thu Jan 19, 2012 12:42 pm 
Limited Edition
User avatar

Joined: Tue Mar 22, 2011 3:37 pm
Posts: 327
Location: Fergus
I'm saying dont completely disasemble the gun im still trying to put mine back together.......
do not pull the barrel foward it wont do a thing but with the forearm wood removed and with the Iron under it gone open the action and pull the barrel toward YOU this is for standard field striping

do not try to disasemble the reciever!

_________________
I Void Waranties. 24/25


Top
 Profile  
 
 Post subject: Re: Springfield Arms .410
PostPosted: Thu Jan 19, 2012 12:51 pm 
Utility Grade

Joined: Wed Jan 18, 2012 10:28 pm
Posts: 11
Fore end off action open.

Can't get anything to move.

The flat piece of spring steel is putting pressure on lug.

Do I need to pull forward until the spring steel releases from lug?


Top
 Profile  
 
 Post subject: Re: Springfield Arms .410
PostPosted: Thu Jan 19, 2012 1:31 pm 
Presentation Grade

Joined: Wed Dec 10, 2008 4:47 pm
Posts: 972
Location: SC
I wonder, have you removed just the forend wood or the entire assy, wood and metal? :?
The forend assy is not clearly shown, below, due to the fold in the book but does this look like it could be your gun? If so, once you have removed the forend (metal & wood) you should simply operate the "top snap" (#56), the gun should breech open and the barrel should fall away in your hand... as described by others above. :o
See part #17, the firing pin. This is a copy of Jack First catalog so you could contact them to see if they have the part.
Image


Top
 Profile  
 
 Post subject: Re: Springfield Arms .410
PostPosted: Thu Jan 19, 2012 1:44 pm 
Utility Grade

Joined: Wed Jan 18, 2012 10:28 pm
Posts: 11
I do not believe this is the gun.

When you remove the forearm screw and fore stock there is no metal attached to the fore stock. Only a solid piece of wood.

Here is a link to a 20 gauge that is the same model.

http://www.gunbroker.com/Auction/ViewIt ... =270184048

The trigger guard in the schematic pictured is different.

I looked at the Numrich site and a 94 is a different gun.


Top
 Profile  
 
 Post subject: Re: Springfield Arms .410
PostPosted: Thu Jan 19, 2012 2:10 pm 
Utility Grade

Joined: Wed Jan 18, 2012 10:28 pm
Posts: 11
I found 162 and below it a B stamped in the piece that holds the flat spring steel piece.


Top
 Profile  
 
 Post subject: Re: Springfield Arms .410
PostPosted: Thu Jan 19, 2012 3:51 pm 
*Proud to be a*
*Proud to be a*

Joined: Tue Mar 30, 2004 10:25 pm
Posts: 1911
Location: NW, CT
What they are saying is, screw the wood fore arm back on, then just pull it off.
The metal will come with it.


Top
 Profile  
 
 Post subject: Re: Springfield Arms .410
PostPosted: Thu Jan 19, 2012 4:12 pm 
Utility Grade

Joined: Wed Jan 18, 2012 10:28 pm
Posts: 11
Mission accomplished.

Barrel removed.

More numbers inside of receiver are 96 44 6 and what looks like an A


Top
 Profile  
 
 Post subject: Re: Springfield Arms .410
PostPosted: Thu Jan 19, 2012 4:13 pm 
Utility Grade

Joined: Wed Jan 18, 2012 10:28 pm
Posts: 11
Oh yes

THANKS


Top
 Profile  
 
 Post subject: Re: Springfield Arms .410
PostPosted: Thu Jan 19, 2012 4:17 pm 
Utility Grade

Joined: Wed Jan 18, 2012 10:28 pm
Posts: 11
NUMBERS IN RECEIVER MATCH BARREL 96446 WITH A 5 ABOVE AND AN A BELOW IT.

I ASSUME SERIAL NUMBERS. 5 & A ?


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 16 posts ] 

All times are UTC - 6 hours [ DST ]


Who is online

Registered users: Bing [Bot], Boehler, Bullet Launcher, cookoff013, Crossing shot, EdSolomons, etech69, Google [Bot], Google Adsense [Bot], Google Feedfetcher, hmaghazi, k8023935, liljake82, Majestic-12 [Bot], Raven2009, SDV, seawolf18, sheiskell, Smoking Joe, SuperXOne


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group     -  DMCA Notice